Shenzhen Chenggong Building Materials Co., Ltd. is supplying Rapid-demould Fast-hardening Compound Cement for rapid-stripping artware that can de-mould within 20 to 30 minutes.
Type: RHC-1.
When mixing suitable ratio water, type RHC-1 Rapid--hardening Compound Cement has Excellent flowability, peaceability and workability. After the mortar is put into the moulds, at the normal temperature, the products can be de-moulded within 20 to 30 minutes. And its surface is better smooth and flat.
Specification,
When W/C 0.24-0.25, at the normal temperature,
Initial Setting: about 1 to 3 minutes,
Final Setting: about 3 to 5 minutes,
De-moulding Time: about 20 to 30 minutes.
Advantages,
Low water requirement,
Excellent flowability, peaceability and workability;
High early strength;
Rapid setting, fast hardening and demoulding;
Higher efficiency of work;
Better planeness and brilliance on surface;
No powder and no crack on surface.
Type RHC-1 Rapid--hardening Compound Cement is fit for making fast de-mould GRC products, artware, cultures stone, building component for decoration, flowerpot, Landscape etc. that are produced in moulds.
Type RHC-1 Rapid--hardening Compound Cement, can be alone used together with mixing water, and can be used with mixing sands. Recommended Cement/Sand ratio is 0.3-0.5. At the normal temperature, they can carry the stripping within 20 to 30 minutes when the mortar put into the mould.
Package: 25kg or 50kg/bag
